外国网站上看到的，如何做娃娃高跟鞋。

熹发表于 2007-11-21 14:05:00

http://2007.aosea.com/Billowuptao/2007112114357873.gif

http://2007.aosea.com/Billowuptao/2007112114414867.jpg

1. Run the polymer clay through a pasta machine several times.This really helps condition it.If you are using soft polymer clay, there will be no need to condition the clay, but the pasta machine helps give you a perfectly even thickness.If you don抰 have a pasta machine, use a small rolling pin preferably made from plastic.Wood tends to soak up the good stuff in the clay.The thickness should look just right for a sole-
http://2007.aosea.com/Billowuptao/2007112114418988.jpg

2.Create a TEMPLATE to be used to make the sole of the foot.This template is nothing more than a simple sole-like shape. The whole shoe will be built on the sole. itwCU[S&
The important thing is that the template must flexible and strong enough to support the clay. W-)XG bM

http://2007.aosea.com/Billowuptao/2007112114419850.jpg

http://2007.aosea.com/Billowuptao/2007112114420303.jpg

http://2007.aosea.com/Billowuptao/2007112114421603.jpg

http://2007.aosea.com/Billowuptao/2007112114421274.jpg

http://2007.aosea.com/Billowuptao/2007112114422696.jpg

http://2007.aosea.com/Billowuptao/2007112114422625.jpg

http://2007.aosea.com/Billowuptao/2007112114422950.jpg

http://2007.aosea.com/Billowuptao/2007112114423120.jpg

http://2007.aosea.com/Billowuptao/2007112114426761.jpg

http://2007.aosea.com/Billowuptao/2007112114427853.jpg
http://2007.aosea.com/Billowuptao/2007112114428911.jpg

http://2007.aosea.com/Billowuptao/2007112114429522.jpg

http://2007.aosea.com/Billowuptao/2007112114430329.jpg

http://2007.aosea.com/Billowuptao/2007112114430508.jpg

http://2007.aosea.com/Billowuptao/2007112114431267.jpg

http://2007.aosea.com/Billowuptao/2007112114433100.jpg

http://2007.aosea.com/Billowuptao/2007112114433502.jpg

看图片基本上能看明白，文字我就不转了，如果有愿意看的，自己去这个网站看吧

http://www.dollstreetdreamers.com/HighHeels.htm

页: [1]

遨海湾超级社区's Archiver

外国网站上看到的，如何做娃娃高跟鞋。